The Security Portal consists of a cylinder block made from steel sheet 3mm thick with internal reinforcement. The transit area components are made of high strength material as well as the curved doors made of multi strata bullet-resistant glass 8+10+8. The metal detector and its column antennas are positioned in the transit area and can be easily maintained and removed. The electronic control boards are located on the secure side with easy access through a vertical panel. Door movement is electromechanical activated by two 24V DC Motors. Motors and mechanisms are located above the door ceiling. They are easily accessible through an outside panel for maintenance. The Security Doors are also provided with: An intercom system for communication to and from the outside and the operating console. A recorded message with instruction triggered by metal detector alarm. Ceiling lamp for zone transit illumination. Push button control panel for opening the door and intercom communication. This new Security Portal is engineered for simplicity and ease of use while providing the utmost in security. The Horton Automatics Automatic Security Portal features integrated metal detection, interlocking doors, and weight sensor. After each metal detector alarm, the entire inner cylinder is checked without operator intervention to determine whether a weapon or similar metallic object has been intentionally left or hidden within the door’s inner cylinder for later retrieval. Standard Features: Level II triple-layered bullet resistant glass in doors and side walls Bullet resistant steel wall construction Two-way communication system Metal Detector Weight detection Emergency battery backup Suspended inner enclosure Entry/Exit flexibility High transit speed (6 to 8 persons per minute) Optional Features: Hands free automatic open door sensors Integrated TV/Video cameras Magnetic/Optic card access Numeric key pad access Biometrics sensors (iris, fingerprint, etc.) Level III triple-layered bullet resistant glazing available Sizes Variety available up to 35.5" to accommodate wheel chairs Power Supply 110/220 VAC + 10%, 50/60 Hz Emergency Power Supply Two 12V batteries, 15 Ah, connected in series Emergency Power Endurance 4 hours minimum Average Wattage 350 VA Maximum Wattage 500 VA Transit Speed 6-8 persons per minute - multiple transit Reset Type Automatic